#include <Arduino.h>

// Test uniquement des 5 boutons gauche
const int leftButtons[5] = {
  13, 12, 14, 27, 26
};

void setup() {
  Serial.begin(115200);
  delay(1000);

  Serial.println();
  Serial.println("===== TEST BOUTONS GAUCHE =====");

  for (int i = 0; i < 5; i++) {
    pinMode(leftButtons[i], INPUT_PULLUP);

    Serial.print("Bouton gauche ");
    Serial.print(i + 1);
    Serial.print(" sur GPIO ");
    Serial.println(leftButtons[i]);
  }

  Serial.println();
  Serial.println("Cablage attendu : GPIO ---- bouton ---- GND");
  Serial.println("Relache = HIGH");
  Serial.println("Appuye  = LOW");
  Serial.println();
}

void loop() {
  Serial.println("----- ETAT BOUTONS GAUCHE -----");

  for (int i = 0; i < 5; i++) {
    int state = digitalRead(leftButtons[i]);

    Serial.print("Bouton G");
    Serial.print(i + 1);
    Serial.print(" GPIO ");
    Serial.print(leftButtons[i]);
    Serial.print(" = ");

    if (state == LOW) {
      Serial.println("APPUYE");
    } else {
      Serial.println("relache");
    }
  }

  Serial.println();
  delay(500);
}